Trane Furnace Repair Nationwide | Dalton Heating & Air Hempstead

Trane Furnace Repair in Hempstead: What to Know First

We’re an independent Trane furnace repair company in Hempstead, and most Trane repairs run $150 – $700 depending on the part that failed. Same-week service is the norm during the heating season, with true emergency calls answered by a live person 24/7 at (516) 559-4840. The price is in writing before we touch the furnace – and every repair carries a written one-year guarantee. If it fails within that window, we return at no charge.

Call (516) 559-4840

This page is for Hempstead homeowners who own a Trane furnace – an XR, XT, XL, S9V2, or an XV80/XV95 – and need a straight answer on what’s wrong, what it costs, and who to call. Marco Benitez and our crew have serviced Trane equipment across Hempstead for years, from the older blocks near Hempstead Turnpike to the residential streets around Hempstead Lake State Park. Call (516) 559-4840 for a free repair estimate.

How Trane Products Fail – and How We Fix Them

Trane builds solid furnaces, but every line has its known weak points. Here’s what we actually see in Hempstead homes, and what we do about it:

• XR80/XR90 – failed ignitors. The hot-surface ignitor on the XR line is a silicon carbide part that cracks after years of heat cycling. The symptom is classic: the draft inducer spins up, you hear the gas valve click, but no flame. We replace it with a nitride ignitor, which lasts significantly longer than the original silicon carbide part. This is a $150 – $300 job in Hempstead depending on access.
• XV95 and S9V2 – pressure switch faults from clogged condensate lines. These high-efficiency condensing furnaces produce acidic condensate that can clog the drain line. When that happens, the pressure switch doesn’t read correctly and the furnace locks out. We clear the line, test the switch, and if needed replace it. On Trane units, we always check the trap assembly too – it’s a common overlooked culprit.
• XL series – blower motor failure from undersized ductwork. In older Hempstead homes, undersized return ducts force the blower to work against high static pressure. On the XL line, this burns out the ECM motor module rather than the motor itself. We check static pressure during the repair – if we don’t, we’re just setting you up for another failure in two or three years.
• S9X and XR – flame sensor corrosion. The flame sensor gets coated with silica and carbon, producing a furnace that lights then shuts off within seconds. It’s a simple cleaning on most Trane models, but on older units the sensor itself degrades and needs replacement. This is one of the most common no-heat calls we get in Hempstead, and it’s usually a quick fix under $200.
• Heat exchanger cracks on 15+ year old XV80/XV95 units. Trane uses tubular and clamshell heat exchangers depending on the model. On older XV units, stress cracks at the crimp points can let carbon monoxide into the airstream. If our inspection finds a failed heat exchanger, we’ll show you the evidence and have an honest conversation about repair cost versus a new furnace – we don’t patch heat exchangers. That’s a safety issue, not a parts replacement.

Safety note: A cracked heat exchanger is a carbon monoxide risk. If your CO detector sounds or you notice soot around the burner area, shut the furnace off and call us. Do not run it.

Our Trane Furnace Repair Process

Here’s how a Trane repair goes when you call Dalton Heating & Air Hempstead:

1. 1
   You call (516) 559-4840. A live person answers – no voicemail tree, no callback window. We ask what the furnace is doing, or not doing, and schedule a window that works for you.
2. 2
   Our technician arrives with the parts likely to be needed. For common Trane failures – ignitors, flame sensors, pressure switches, control boards – the truck is stocked. That means many repairs complete on the first visit without a follow-up.
3. 3
   We diagnose and show you the problem. Before any work begins, the price is in writing. If the repair is optional – say, a blower motor that’s noisy but still turning – we’ll tell you that too. “Tell me the problem, I’ll tell you the fix and the price – then you decide.”
4. 4
   We use OEM Trane parts or equivalent quality aftermarket parts, with the trade-off explained. If you’re under factory warranty, we use OEM to keep it valid. If you’re out of warranty, we’ll quote both and let you choose. On ignitors and motors, we broadly recommend upgraded aftermarket where the failure pattern is known.
5. 5
   We test the furnace through a full cycle. Not just “does it light” – we check manifold gas pressure, temperature rise, and safety switch operation before calling the job done.
6. 6
   We clean up and hand you the written guarantee. Every repair carries a 365-day written guarantee. If the same repair fails within that year, the second visit is free. That’s The Garrison Code, and it’s not negotiable.

What Trane Furnace Repair Costs in Hempstead

Most Trane furnace repairs in Hempstead fall between $150 and $700. The low end is a diagnosable, easy-access part like an ignitor or flame sensor. The high end is a control board, an ECM blower module, or a gas valve on a high-efficiency model.

Here’s what moves the price:

• Ignitor or flame sensor: $150 – $300
• Pressure switch (including trap and line clearing): $200 – $400
• Gas valve replacement: $300 – $550
• ECM blower motor module: $450 – $700
• Furnace control board: $350 – $600

Diagnostic and the written estimate are free. If a repair doesn’t make sense because of the unit’s age or a cracked heat exchanger, we’ll say so plainly and help you look at replacement options. Call (516) 559-4840 for an exact quote – there’s no charge for the estimate.

Why Hempstead Homeowners Call Dalton Heating & Air Hempstead for Trane Work

We’re a Garrison Partners company, founded in 2003, and every job runs under The Garrison Standard: arrive inside the stated window, put the price in writing before starting, do the work by the book, leave the site clean, and stand behind the repair for a full year. Our 365-Day Done Right Promise means exactly what it says – if it’s not done right, we make it right. Not for 30 days. For a full year.

Our technicians are factory-trained on Trane equipment, background-checked, and uniformed. They’re also trained on eight other brands – Carrier, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard – because plenty of Hempstead homes have mixed systems, and we’d rather diagnose accurately than guess based on one brand’s playbook. You know who’s coming before they arrive, and you know the price before they start.

FAQs