Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateCarrier HVAC in Hempstead, NY | Dalton Heating & Air Hempstead
Carrier AC Repair - Hempstead generally runs $150 – $650, and $3,500 – $7,500 for a full system install, depending on the model and what’s failed. We’re Dalton Heating & Air Hempstead, an independent Carrier service provider, and the one thing that sets our Carrier work apart here is this: we see the failure patterns specific to Hempstead’s housing stock every single week. Salt-air coil pitting south of Hempstead Turnpike, flooded-basement inducer rust, attic retrofits with undersized return air. Those aren’t rare calls for us; they’re Tuesday. Call (516) 559-4840 and Marco Benitez or one of our techs will come out, put a price in writing, and fix it right.
Why Hempstead Residents Choose Us for Carrier Service
We service Carrier equipment across Hempstead every day, and we do it without being manufacturer-affiliated. That independence matters. We’re not pushing a replacement because a factory rep told us to; we’re telling you what the equipment actually needs. Our techs know the Infinity, Performance, and Comfort lines inside out, from the oldest R-22 round condensers to the newest Greenspeed inverter boards. When a 24ANB1 condenser loses a communication board or a 58STA furnace won’t light, we’ve seen it before and we know the fix.
Marco Benitez grew up in East Los Angeles, picked up his fundamentals at Los Angeles Trade-Technical College, and has spent the better part of three decades doing HVAC across the Northeast. Before any repair, you get a written price. The repair itself is guaranteed in writing for a full year. And if that repair fails within the year, we come back at no charge. That’s The Garrison Standard, and it’s been the same since 2003.
Need a second opinion on a Carrier system that’s acting up? Call us. Tell me the problem, I’ll tell you the fix and the price, then you decide.
Styles & brands we work with
Common Carrier HVAC Problems We Solve in Hempstead
- Salt-air coil pitting on south-side condensers. Homes south of Hempstead Turnpike sit close enough to the Atlantic that salt air chews through Carrier condenser coil fins and aluminum end plates within 5 – 7 years. The result is a slow refrigerant leak that a less-experienced tech might misdiagnose as compressor failure. We pressure-test first.
- Rusted inducer motors and pressure switches in flooded basements. The Comfort Series 58STA and 58STX furnaces in older Hempstead basements take on water during nor’easters. Once the inducer housing rusts and the pressure switch ports corrode, you get intermittent no-heat lockouts after heavy rain. We keep OEM ignitors and pressure switches on the van for this exact call.
- Stuck gas valves on two-stage Performance furnaces. The 59TP6 and 59TP5 gas valves sit unused all summer in high-humidity basements, and by October the low-fire stage sticks. We find this in older colonials near the village center, usually the week the heat first kicks on.
- Zoning communication errors on Infinity Greenspeed units. The 25VNA8 heat pump throws error codes 84 and 126 when the original zoning dampers were never configured for the static pressure of a converted attic or basement. That’s common in Hempstead, where finished attic and basement spaces often lack proper return air.
- Leaking evaporator coils on mid-2000s Comfort units. The 24ABC6 evaporator coils from that era developed pinhole leaks at the hairpin bends. In Hempstead’s damp summers, that shows up as the system cooling weakly while the indoor unit freezes.
Carrier Service in Hempstead: What Local Conditions Mean for Your Equipment
Hempstead’s older core near the LIRR tracks has one of the highest concentrations of pre-1950 homes on Long Island that still run radiators and no central air. That means any Carrier condenser we install in those blocks has to work with one of two realities: either pairing the unit with a ductless mini-split for the second floor, or routing new ductwork through 90-year-old joists that were never built for it. The narrow side alleys off Hilton Avenue and the streets around the village center add another wrinkle: a standard 24ABC6 unit often won’t fit down the side path, so we use a portable gantry or a crane lift to place the condenser in the yard. We’ve fenced and refenced more than a few backyards in Hempstead to make that happen cleanly.
That’s the information a generic Carrier page can’t give you. The equipment is the same. The house and the alley aren’t.
Carrier Models & Products We Service in Hempstead
We work on the full Carrier residential range: Infinity Series (24ANB1, 25VNA8), Performance Series (24ACC6, 59TP6), Comfort Series (24ABC6, 58STA), and the ductless mini-split line (38MGRQ, 40MAHB). We use genuine Carrier OEM capacitors, ignitors, and pressure switches on the van because factory parts hold up better to Long Island salt and humidity than aftermarket knockoffs. For out-of-warranty compressors and coils, we use Carrier-approved reman or matching-spec parts. And we’ll tell you straight when a 15-year-old R-22 system isn’t worth a $600 repair. If you’re looking for broader Carrier sales & service, we handle installations too.
Our crew got called to a 1930s colonial on Hilton Avenue, just north of Hempstead Turnpike, where the homeowner had been nursing an old Carrier 38TKB round condenser through another Long Island summer. The salt air had eaten a pinhole in the condenser coil and the compressor was pulling 24 amps. We quoted a Performance 24ACC6 with a factory-matched evaporator, routed new lineset through the existing chase, and lifted the unit over the narrow alley fence with a portable gantry. No crane, no fence removal, no drama.
See the difference
Before
After
Before
After
Before
AfterCarrier Service Pricing in Hempstead
Here’s what you can expect to pay for common Carrier repairs in Hempstead:
| Service | Typical Range |
|---|---|
| Refrigerant recharge (R-410A, up to 2 lbs) | $150 – $400 |
| Condenser fan motor replacement (Carrier OEM) | $250 – $450 |
| Ignitor replacement (58STA/58STX) | $150 – $300 |
| Heat exchanger replacement (59TP6) | $400 – $700 |
| AC Installation (24ABC6 3-ton) | $3,500 – $7,500 |
Furnace repairs run $150 – $700 depending on the part. Tune-ups are $80 – $200. The exact price for your system depends on the model, age, and what’s actually failed, which is why we diagnose first and write the price before any work begins. Free estimate means free: we come out, we look, we hand you a number. Call (516) 559-4840 and we’ll set it up.
Serving Hempstead, NY - Our Local Coverage Area
We’re based in the Hempstead area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Carrier HVAC in Hempstead
It’s usually the compressor drawing high amps because the condenser coil is coated in salt-air corrosion or the run capacitor is weak. On a hot humid day the compressor works harder, pulls more amperage, and trips the breaker. We see this on Infinity 24ANB1 units south of Hempstead Turnpike all summer. We’ll test the capacitor, check amp draw, and clean or replace the coil as needed. Call (516) 559-4840 for a diagnostic visit.
Yes, but the Heat Pump Installation - Hempstead needs planning. Brick exteriors mean drilling through masonry for the line set, and a colonial with radiators usually has no return air to work with. A ductless multi-zone Carrier 38MGRQ with wall units handles the second floor without cutting joists, and we route the lineset through a chase or down the corner of the house. Marco and his crew have done this in the tight colonials north of the LIRR tracks enough times that we can quote it accurately before work starts.
First, cut power to the furnace and don’t run it until it’s inspected. Flood water gets into the inducer motor housing and the pressure switch ports, which causes intermittent no-heat lockouts a few days later. We check for rust, clean the ports, and replace the inducer or pressure switch if they’re corroded. If the water got up to the burners or the gas valve, that’s a bigger job. Call us and we’ll come look.
Usually not, and we’ll tell you that before you spend a dollar. A round-cabinet Carrier running R-22 is past the point where refrigerant gets more expensive and less available each year. If the leak is in the coil and the compressor is original, you’re putting money into a system that’s already at the end of its life. A new Comfort 24ABC6 or Performance 24ACC6 runs $3,500 – $7,500 in Hempstead. We’ll quote both repair and replacement and let the numbers decide.
Error code 84 is a communication fault, and it happens when the added square footage changes static pressure in the duct system and the zoning dampers were never re-configured. The attic conversion adds supply runs but usually no return air, which the Infinity board reads as a fault. We’ll map the zoning, set the damper positions correctly, and if the return air is undersized, we’ll quote adding return runs. Call (516) 559-4840 and ask for a zoning diagnostic.
Service Areas Near Hempstead
We serve the whole Hempstead service area, including the village, Uniondale, and East Meadow. If you’re just over the border, we handle Carrier service in Levittown and Carrier service in Freeport as well. Hicksville and Long Beach are also within our service reach.
Book Your Carrier Service in Hempstead Today
Need a Carrier repair in Hempstead? Call (516) 559-4840 now. A real person answers 24/7, and we’ll get a tech to your door with the parts on the van. Same-day service is available for most repairs. The price is in writing before any work starts.
Written by Marco Benitez, Owner at Dalton Heating & Air Hempstead, serving Hempstead since 2003.