Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Replacement in Hempstead, NY
Furnace replacement in Hempstead typically costs between $4,800 and $9,200 for a standard single-family home, depending on furnace size, efficiency rating, and whether ductwork modifications are needed. Most replacements take one full day, sometimes two if we’re reconfiguring venting or relocating the unit. At Dalton Heating & Air Hempstead, every quote is in writing before we touch a tool, and the installation is covered by our 365-Day Done Right Promise. Call (516) 559-4840 for a free estimate, and a live person answers, day or night.
If you’re weighing a repair against a replacement, or your system just quit in February, this page covers what to expect: the signs a furnace is done, how our replacement process works, what you’ll actually pay in this market, and the questions homeowners ask us most. You can also read more about our full Heating & Furnace in Hempstead services if you’re still deciding between repair work and new equipment.
Key Takeaways
- Furnace replacement in Hempstead runs roughly $4,800 – $9,200 for most homes; size and efficiency drive the range.
- Dalton Heating & Air Hempstead provides written pricing before any work starts, on every job, without exception.
- We install and service Rheem, York, Daikin, and Bryant furnaces, among other major brands.
- Every installation is covered by the 365-Day Done Right Promise and a written guarantee.
- Same-day and emergency replacement calls are answered by a live person 24/7 at (516) 559-4840.
When You Need Furnace Replacement
Some furnaces give you months of warning. Others die on the coldest night of the year and force the decision immediately. Here are the scenarios where we tell Hempstead homeowners to start planning for a replacement rather than another repair:
- Your furnace is 15 to 20 years old. Even a well-maintained unit loses efficiency and reliability past the 15-year mark. If yours was installed around 2005 – 2010, you’re on borrowed time.
- The heat exchanger is cracked. This is the number one safety-related replacement we see. A cracked heat exchanger can leak carbon monoxide into the house. It’s not a part you patch; it’s a reason to replace.
- Repair costs have crossed the halfway line. If a single repair would run $2,000 or more on a furnace worth $1,000, replacement is the smarter money. The math works the same way it does with an old car.
- Your energy bills keep climbing without a weather explanation. Older furnaces run at 60 – 80% efficiency. A new 95%+ unit can cut gas use noticeably, especially during Hempstead’s damp, cold winters.
- Rooms heat unevenly and the system short cycles. When a furnace fires up, shuts off, fires again, and never satisfies rooms on the far end of the house, the equipment is struggling. That’s a sizing or component failure, not a duct issue.
- You’re tired of annual emergency repairs. If we’ve been out twice in one season and the third call is coming, most homeowners we work with would rather put that money toward new equipment.
Safety note: a cracked heat exchanger is not a do-it-yourself situation. Carbon monoxide is odorless and colorless. If you smell gas or your CO detector alarms, leave the house and call National Grid or 911 first. We handle the furnace after the immediate danger is clear.
Our Furnace Replacement Process
Here’s how a replacement with Dalton Heating & Air Hempstead works, step by step. No surprises, no price changes at the door, no crew wandering in without you knowing who they are.
- You call (516) 559-4840 and speak to a live person. Not an answering service. Not a voicemail queue. A person who can schedule a visit inside a real time window.
- A background-checked, uniformed technician arrives and assesses the system. We measure the home’s square footage, inspect the ductwork, check the existing venting, and talk through how the current furnace has been performing. We never sell a furnace size by guesswork.
- You get written pricing before any work starts. The quote includes the furnace model, the labor, the removal of the old unit, and any venting or gas line work. That price does not move unless you change the scope.
- We install the new furnace on the scheduled day. Most replacements are done in one day. The crew lays down drop cloths, works clean, and hauls away the old equipment. When we leave, the area looks the way we found it.
- We test, commission, and walk you through the new system. Startup, thermostat pairing, airflow check, gas pressure check. We stand there until you know how to run the new unit.
- You get the 365-Day Done Right Promise in writing. If anything about the installation isn’t right within a full year, we return and make it right at no charge.
This is the same Garrison Standard process we’ve followed since 2003. It’s a non-negotiable set of terms under The Garrison Code: arrive inside the window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Furnace Replacement Pricing in Hempstead
Furnace replacement in Hempstead runs between $4,800 and $9,200 for most single-family homes. The range breaks down by equipment tier and home size. Here’s what we see in this market:
| Scope | Typical Price Range | What It Includes |
|---|---|---|
| Basic 80% efficiency furnace, smaller home | $4,800 – $5,900 | Standard single-stage unit, basic venting, standard thermostat |
| Mid-range 92 – 95% efficiency, average home | $6,200 – $7,500 | Two-stage furnace, PVC venting, programmable thermostat |
| High-efficiency 96%+ or modulating, larger home | $7,800 – $9,200 | Modulating gas valve, variable-speed blower, Wi-Fi thermostat |
| Ductwork modifications or relocation | Adds $500 – $1,800 | New return drops, plenum work, relocation of unit |
What moves the price most is the efficiency tier and whether your ductwork and venting can stay as-is. A furnace that replaces an old 80% unit with the same venting is simpler than one that needs new PVC runs for a condensing unit. Gas line capacity matters too. In older Hempstead homes, we occasionally have to upsize the gas line, which adds labor and material.
We give a written quote before any work starts, and that number is the number. Estimates are free. Call (516) 559-4840 and tell us the square footage, the age of the furnace, and what it’s been doing lately; we’ll give you a straight answer on what replacement should cost in your house.
One more note on brands. We’re factory-trained on Rheem, York, Daikin, and Bryant equipment, and we’ll recommend the right match for your home’s size and your budget. We don’t push one brand for every house. The right furnace is the one sized correctly and installed to spec.
FAQs – Furnace Replacement
How much does furnace replacement cost in Hempstead, NY?
Furnace replacement in Hempstead typically costs $4,800 to $9,200 for a single-family home, with most jobs landing between $6,200 and $7,500 for a mid-range high-efficiency unit. The final number depends on furnace size, efficiency rating, and whether existing ductwork and venting can be reused. Call (516) 559-4840 for a free written estimate with the exact number for your home.
Can you replace a furnace the same day in Hempstead?
Yes, in many cases we can. If your furnace fails in the middle of a heating season and the equipment is in stock locally, we can often complete a same-day or next-day replacement. Call (516) 559-4840 and describe the situation; we’ll tell you honestly what’s possible for your home and schedule the soonest available window.
Is it cheaper to repair or replace a furnace?
It depends on the repair and the age of the furnace. If the repair costs less than half the value of the unit and the furnace is under 12 years old, repair usually makes sense. If the heat exchanger is cracked or the unit is 15+ years old, replacement is the better long-term move. We’ll give you both numbers in writing and let you decide.
What brands of furnaces do you replace and install?
We’re factory-trained to install and service nine major residential HVAC brands, including Rheem, York, Daikin, and Bryant. We recommend the right equipment for your home’s size, ductwork, and budget. Every installation includes written pricing before work begins and the 365-Day Done Right Promise.
Do you offer a guarantee on furnace installation?
Yes. Every furnace replacement from Dalton Heating & Air Hempstead carries the 365-Day Done Right Promise, a full-year written guarantee on the installation. If anything isn’t right within that year, we return at no charge and make it right. That guarantee is part of The Garrison Standard we’ve operated under since 2003.
Hempstead Furnace Replacement You Can Hold Us To
Replacing a furnace is a real purchase, and you should know exactly what you’re getting before you commit. At Dalton Heating & Air Hempstead, that means written pricing, a named technician from a background-checked crew, installation by factory-trained techs, and a guarantee that runs a full year, not 30 days. Marco Benitez and the team have been holding this standard in Hempstead since we opened our doors. When you’re ready to talk numbers, call (516) 559-4840. A live person answers, the estimate is free, and the price goes in writing before any work starts.
Written by Marco Benitez, Owner at Dalton Heating & Air Hempstead, serving Hempstead.